Innovative biometric fingerprint reader with built-in Wi-Fi card
This fingerprint reader can able to connect to your Wi-Fi and transfer the data to the software easily.
This machine built-in with push algorithm, so once the employee scanned his finger, the data will be pushed to server immediately via Wi-Fi.
It has the fastest commercial-based fingerprint matching algorithm with high performance, high-image quality optical fingerprint sensor. The 3” TFT can display more information vividly, including fingerprint image quality and verification result etc.
It has Built-in 2000 mAh backup battery can eliminate the trouble of power failure. The backup battery can supply power to the machine for 2- 3 hours. So, this model is most suitable where there is a frequent power failure and construction job site where there is limited or no power supply. The battery will get auto recharge once the reader connected to the power supply.
Up to 3 fingers per employee can be registered. While doing attendance the employee can use any on the finger to do clocking.
It takes about one second to verify the employee finger and the Date & time has been registered into the device.
If a particular employee all the finger damaged, then that employee can use PIN number for attendance purpose.
WIFI | Built-in wifi card |
Battery | Built-in battery |
Sensor | Reliable Optical sensor |
Data Transfer method | WIFI / TCPIP Network (RJ 45) / USB Thumb drive |
Capacity | 3000 fingerprint Templates |
Storage Memory | 100,00 verification records |
Primary Verification method | Fingerprint |
Secondary Verification method (optional) | Proximity car / PIN number |
Verification Message | Audio message & displays the employee name |
Screen | Color 3” TFT screen with GUI interface |
User capacity | 3,000 |
Transaction Storage | 100,000 |
Verification Mode | 1:1, 1:N |
Verification time | <=2s |
False Acceptance Rate (FAR) | <=0.0001% |
False Rejection Rate (FRR) | 0.01% |
Size | 210W x 157H x 50D mm |
Weight | 505g |
Keypad | 16 keys (with 4 function keys) |
Power Supply | 12V DC 1.5A |
Operating Temperature | 0℃-45℃ |
Operating Humidity | 20% – 80% |