Introduction :

Our fingerprint door lock system packaged with fingerprint reader, Electro Magnetic door lock, emergency break glass, backup battery,  exit switch & access management software.

BIO-ACCESS-I Fingerprint door lock Reader: This model fingerprint reader is compact and unique in design with high quality optical sensor. The optical sensor effectively detect fingerprints with scarred cut, swelling and too dry or wet fingers with high speed conversion and classification.

The fingerprint reader will be installed outside near to the door.

Up to 3 fingers per employee can be registered. The employee can use any one of  the finger for verification. It takes about one second to verify the employee fingerprint and a signal send to the door lock to release the door immediately for valid verification. The Date & time has been recorded into the device.

EM Door Lock: This is the Electro Magnetic Door Lock unit will be fitted into the top of the door. This door lock unit supplied by power and will always remains locked. This door lock will get released only upon the valid signal from the fingerprint reader.

Backup Battery: The backup battery will continue to supply the power to the fingerprint door lock system for 4 to 6 hour in the event of power failure.

Emergency Break Glass: In the event of fire or other emergency the employee just need to break the glass then the fingerprint door lock system will be released permanently to evacuate all the employees immediately.

Exit Switch: It will be installed inside to the door. The employee just needs to press the exit switch to release the door lock for exit.

The fingerprint door lock system can be used as a standalone door access or computerized system.

Access Management Software: This software may be installed in to PC and can able to linked to the fingerprint door lock system via network LAN cable or RS 232 cabling.

There are reports available to view the who access the door at what time and employees TIME IN & TIME OUT attendance.

Time Zone Setting: This is the setting where we can program which group of employees can access which door and at what time. For an example we can program 24 x 7 access zone & office hour access zone. Different time zone setting can be programmed in the software which can send to the fingerprint door lock unit.

Feature:

• Fingerprint and PIN Verification
• High Quality optical sensor
• Stores up to 1500 Fingerprint templates. One employee can register up to 3 fingers. so if one finger injured can use another one.
• Built-in Ethernet card for durable connection
• Battery backup for internal data storage and internal time clock
• Audio message and can display the employee name after the verification.
• 50 Time Zone setting, 5 grouping & holiday management.
• Up to 30,000 transaction log capacity.
• Supports RS232, RS422 & RS485 connections.
• Supports 2 languages (English & Chinese)
• Unique 1:N quick search function.
• Optional 1:1 verification function.

Specifications :